Ntuziaka nzọụkwụ site na ntụzịaka maka ịkpụzi injection plastik sitere na ụlọ ọrụ na-akpụzi mgbaba plastik dị elu.

The plastic injection ịkpụzi usoro bụ usoro kachasị ewu ewu maka ịme akụkụ plastik. Nke a bụ n'ihi nnukwu ụzọ dịgasị iche iche nke a pụrụ isi kpụzie ihe a, ọbụna mgbe ha dị mgbagwoju anya, ọ bụkwa usoro ngwa ngwa na nke ọma.

Otu n'ime uru ndị kachasị mkpa bụ na akụkụ ndị a kpụrụ akpụ chọrọ obere ọrụ ịmecha, ebe ọ bụ na usoro a na-enye ohere ịmepụta enweghị njedebe nke isiokwu n'otu ibe, na textures, agba na mgbanwe ndị ọzọ akọwapụtara kpọmkwem site na injection n'ime ihe.

Otú ọ dị, usoro a na-ewe obere usoro iji dị irè. Ndị a bụ:

Ngalaba Ike

Usoro ahụ na-amalite na hopper nke jupụtara na granules plastik site na ihe nkesa. Nke a bụ akụrụngwa nke ngwaahịa ọ bụla, nke a na-enye nri n'ime gbọmgbọm nke na-ebu polymer site na nkeji injection.

 

Ngwakọta hydraulic

Ka ihe a wụrụ awụ wee na-aga n'ihu site na gbọmgbọm nke ngalaba ịgba ọgwụ, a na-eji usoro hydraulic nke moto eletrik na-eme ka spindle na-ebugharị, nke na-ebute mmegharị axial nke gbọmgbọm na agụba ya n'ọsọ na-adịghị agwụ agwụ.

 

Ngalaba ịgba ọgwụ

A na-ejikọta polymer na okpomọkụ sitere na ìgwè dị iche iche nke resistors na-etinye gburugburu gbọmgbọm ahụ. A na-agbanye mmiri n'ime ihe a na-akpụ akpụ site na nozulu, na-arụ ọrụ zuru oke iji mejupụta ma sie ike n'ime ihe ebu.

 

Ngalaba ịkpụzi

Ọ na-enwe igwe hydraulic ma ọ bụ igwe eji arụ ọrụ mejupụtara efere abụọ na-ejide ebu, nke na-eme ka njikọ hermetic nke akụkụ abụọ nke ebu ahụ na-etolite oghere nke akụkụ ahụ ma guzogide nrụgide siri ike a na-etinye mgbe a na-etinye polymer n'ime ya. ebu.

A na-edozi otu n'ime akụkụ abụọ nke ebu ahụ, nke bụ nke a na-ejikọta na polymer injection unit, ebe nke ọzọ na-eme ka ọ na-emegharị n'oge. ịkpụzi okirikiri ma mara dị ka mmịpụta ma ọ bụ mmechi akụkụ.

Otu unit a na-emepe ọzọ mgbe akụkụ ahụ a na-agbanye n'ọkụ na-esiwanye ike, mgbe a na-eme ka ọ dị jụụ site n'enyemaka nke mmiri refrigerant na n'ikpeazụ, a na-achụpụ ya site na bolts knockout n'akụkụ onye na-ewepụta ya, ịmalite usoro ahụ ọzọ, nke a na-aga n'ihu.

 

Ntuzi

Akpụkpọ ahụ bụ akụkụ kachasị mkpa nke igwe injection, n'ihi na ọ bụ ebe akụkụ plastik ga-ewere ọdịdị ya ma mechaa. Ọ bụ akụkụ a na-agbanwe agbanwe nke a na-agbanye n'ime akwụkwọ akụkọ site na ihe njide ebu. Ọ nwere akụkụ abụọ hà nhata nke jikọtara ya na hermetically.

Nke ọ bụla n'ime akụkụ ahụ nwere oghere nke ga-ejupụta na mmiri polymer na-ekpo ọkụ, na-eme ka ọdịdị ya ma gbanwee akụkụ kwekọrọ. A na-agbanye ihe ahụ site na injector unit iji mejupụta oghere ebu 100% tupu ọ dị jụụ.

 

Usoro ịgba ọgwụ

N'ikpeazụ, ihe na-abanye n'ime gbọmgbọm ahụ na-ekpo ọkụ, apata ụkwụ na-agbanye polymer n'ime oghere ndị na-akpụ akpụ, na n'ikpeazụ, polymer na-ewere ọdịdị nke ọkpụkpụ ahụ ma mee ka ọ dị jụụ iji sie ike.

Maka ihe ndị ọzọ gbasara nzọụkwụ site nzọụkwụ ntuziaka maka ịkpụzi injection plastic si elu nkenke plastic injection ịkpụzi factory, ị nwere ike ịga nleta na Djmolding na https://www.djmolding.com/high-precision-plastic-injection-molding-factory-another-way-to-deal-with-the-recovered-material/ n'ihi na ihe Ama.