Jagoran Mataki Daga Mataki Zuwa Gyaran Allurar Filastik Daga Babban Madaidaicin Filastik Injection Factory

The filastik allurar gyare-gyaren tsari ita ce mafi mashahuri fasaha don yin sassan filastik. Wannan ya faru ne saboda manyan hanyoyi da yawa waɗanda za a iya ƙera wannan kayan, ko da lokacin da suke da rikitarwa, kuma yana da sauri da inganci.

Ɗaya daga cikin mafi mahimmancin fa'idodi shine cewa sassan da aka ƙera suna buƙatar ƙaramin aikin gamawa, tunda wannan tsari yana ba da damar kera ƙarancin labarai a cikin yanki ɗaya, tare da laushi, launuka da sauran masu canji waɗanda aka ayyana kai tsaye daga allurar a cikin mold.

Koyaya, wannan tsari yana ɗaukar ƙananan matakai don yin tasiri. Wadannan su ne:

Rukunin Wuta

Tsarin yana farawa a cikin hopper wanda ke cike da granules na filastik ta hanyar mai rarrabawa. Wannan shi ne danyen kayan kowane samfur, wanda ake ciyar da shi a cikin ganga wanda ke ɗaukar polymer ta sashin allura.

 

Naúrar ruwa

Domin narkakkar kayan ya ci gaba ta cikin ganga na sashin allura, igiyar igiyar tana tafiya ne ta hanyar tsarin ruwa mai amfani da injin lantarki, wanda ke haifar da motsin axial na ganga da ruwan wukake cikin kwarara mara iyaka.

 

Sashin allura

Ana haɗa polymer ɗin tare da zafin da aka samar ta nau'ikan nau'ikan resistors waɗanda aka sanya kewaye da ganga. Ana allurar ruwa a cikin injin ta cikin bututun ƙarfe, yana yin isassun matsi don cikawa da ƙarfi a cikin ƙirar.

 

Sashin gyare-gyare

Ya ƙunshi latsa na'ura mai aiki da karfin ruwa ko injin injin da aka yi da faranti guda biyu masu riƙe da ƙura, wanda ke haifar da ƙungiyar hermetic na sassan biyu na ƙirar don samar da rami na ɓangaren kuma suna tsayayya da matsi mai ƙarfi da ake amfani da su lokacin da aka yi wa polymer allura a cikin m.

Daya daga cikin sassan biyu na mold ana kiyaye shi, wanda shine wanda ke manne da na'urar allurar polymer, yayin da ɗayan da ke ci gaba da motsi a lokacin gyare-gyaren sake zagayowar kuma an san shi da hakar ko ɓangaren rufewa.

Wannan naúrar tana sake buɗewa idan ɓangaren da aka yi masa allura ya ƙarfafa, idan aka sanyaya shi tare da taimakon ruwa mai sanyi, sannan a fitar da shi ta hanyar ƙwanƙwasa a gefen cirewa, don sake sake zagayowar, ana ci gaba da yin ta.

 

mold

Samfurin shine mafi mahimmancin ɓangaren injin allura, domin a nan ne ɓangaren filastik zai ɗauki siffarsa ya ƙare. Wani sashi ne mai musanya wanda aka dunkule a cikin latsa ta cikin mariƙin ƙira. Ya ƙunshi sassa guda biyu daidai gwargwado waɗanda aka haɗa su ta hanyar hermetically.

Kowane ɗayan sassan yana da rami wanda za a cika shi da ruwan polymer mai zafi, don ɗaukar siffa da maimaita sashin da ya dace. Ana danna kayan ta hanyar injector naúrar don cika rami 100% kafin sanyaya.

 

Tsarin allura

A ƙarshe, kayan ya shiga cikin ganga ya yi zafi, cinya yana tura polymer a cikin cavities, kuma a ƙarshe polymer ya ɗauki siffar ƙirar kuma ya yi sanyi don ƙarfafawa.

Don ƙarin bayani game da jagorar mataki zuwa mataki don yin gyare-gyaren filastik daga high ainihin filastik allura gyare-gyare factory,zaku iya ziyartar djmolding a https://www.djmolding.com/high-precision-plastic-injection-molding-factory-another-way-to-deal-with-the-recovered-material/ don ƙarin info.